• Built-in 200W output power
• 4 Mic/Line input channels
• Variable digital delay with time and repeat control
• Amplifier power assignable with additional 1/4" send and return jack
• Stereo RCA 2T Return and Record I/O
• Super musical 2-band EQ on mono channels

• Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
• Power handling: 150 Watts (RMS); 300 Watts (Program)
• Frequency response: 65 Hz ~ 20 KHz
• High sound pressure level, 96 dB SPL @ 1W / 1M
• 10" heavy-duty woofer and piezo tweeter 8 ohm nominal load
• Built-in handle
• 35 mm stand adapter built-in
• Dual 1/4" phone jacks

Microphone with Cable and 2 x Speaker Cables

Phonic 3 Year Warranty! 

Free Postage to Most of Australia!  please email for a postage quote if you like in the Far North, WA or a remote area

• Built-in 2 x 200W / 4 ohms dual power amplifier for Main or Main/Monitor (Bridge mono, 400W / 8 ohms)
• 32/40-bit digital multi-effect processor with 16 programs plus parameter control and footswitch jack
• Six balanced Mic inputs and eight Line inputs (4 mono, 2 stereo channels)
• Two Super Hi-Z inputs optimized for direct instrument input
• 2-band EQ on each input channel
• 7-band master graphic EQ
• Pad control on channels 1 to 4
• AUX input
• Stereo RCA I/O
• Global +48V phantom power for mic inputs
• Built-in limiters
• Monitor and effect sends on each input channel
• Drive level / effect out master control for signals sent to effect processor

• Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
• Power handling: 230 W (RMS), 460W (Program)
• Frequency response: 60 Hz ~ 20 KHz
• High sound pressure level, 95 dB SPL @ 1W / 1M
• 12" heavy-duty woofer and piezo tweeter
• 8 ohm nominal load
• Built-in handle
• 35 mm stand adapter built-in
• Dual 1/4" phone jacks

• 2 x 440W / 4 ohm dual power amplifiers for Main or Main/Monitor (Bridge mono, 880W / 8 ohm)
• 32/40-bit digital multi-effect processor with 16 programs plus parameter control
• Seven balanced Mic inputs
• 10 Line inputs
• Two super Hi-Z inputs optimized for direct instrument input
• 3-band channel EQ
• Dual 7-band graphic equalizers with In/Out switches for Main L/R or Main/Monitor
• Rumble filters for Mic inputs
• Pad control on channels 1-4
• One AUX input
• Monitor and effect sends on each input channel
• +48V phantom power
• Two built-in limiters
• Rec out with trim control for record level matching
• Mains power switchable between 115 VAC and 230 VAC

• Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
• Power handling: 230 W (RMS), 460W (Program)
• Frequency response: 60 Hz ~ 20 KHz
• High sound pressure level, 95 dB SPL @ 1W / 1M
• 12" heavy-duty woofer and piezo tweeter
• 8 ohm nominal load
• Built-in handle
• 35 mm stand adapter built-in
• Dual 1/4" phone jacks